RELANCE 805405-1R 電氣隔離電源
dcs在連續控制領域有這極其重要的地位，到目前為止，對于dcs未來發展問題有許多爭論，但下面的幾個問題是大多數認識認為dcs急需解決的問題； （1）開放性。關于開放性，這個問題是制約dcs發展的一個很大的因素，由于dcs各廠家對于自己的網絡協議和系統軟件采取嚴格的保密措施，這就造成了如果別的廠家的plc或其它的控制設備就不可能很好的無縫的接入dcs控制系統，往往需要經過復雜的協議轉換，得到的通訊速率和通訊能力都很不理想，例如honeywell公司的tps系統和ab公司的plc5系列的plc進行通訊就需要通過串口并加上雙方為通訊開發出來的輔助設備來實現，但當通訊量較大時，其實時性就大大降低，這個問題就阻礙了dcs的應用領域和競爭力。目前一些dcs廠家已經意識到該問題的嚴重性，目前honeywell公司主推的pks控制系統就采取了controlnet的通訊網絡，舍棄了傳統的lcn網，且采用了服務器結構的形式，使其開放性大大加強。除去通信問題以外，操作系統、數據庫、人機界面、控制策略的組態等方面，都有開放性問題，所以隨著技術進步，dcs的開放性需要逐漸加強，而且還應發揮其特色，使分散型計算機控制系統，從傳統dcs中解放出來，使dcs與cips系統的調度層、管理層、決策層（輔助決策層）進行無縫連接，將dcs的相關信息上傳，使其實時數據庫、歷史數據庫為上述３層所共用，避免重復建庫，為先進控制和優化建好平臺，與上層的關系數據庫共享數據，真正實現管控一體化。
上世紀70年代，由于經濟的迅速發展，生產裝置迅速向大型化方向發展，尤其是石油煉制、冶金、化工、建材、電力等行業，這些行業生產裝置的大型化能夠帶來明顯的好處，如生產效率提高、原料消耗減少、勞動力成本降低等。生產設施的大型化要求設備之間具有更好的協調性，而且停機將帶來更大的損失。因此用戶迫切希望能夠有一種產品或者系統能夠解決生產設施大型化和連續化所面臨的控制問題。與此同時，在20世紀70年代中期，大規模集成電路取得突破性的發展，8位微處理器得到了廣泛的運用，使自動化儀表工業發生巨大的變化，現代意義上的DCS也應運而生，1975年Honeywell推出了第一個DCS產品。 中國使用DCS始于1981年，當時吉化公司化肥廠在合成氨裝置中引進了Yokogawa的產品，表現出良好的控制性能和可靠性。隨后中國引進的30套大化肥項目和大型煉油項目都采用了DCS控制系統，提高了生產設施的效率和產品質量的連續性，并且物耗和能耗也有不同程度的降低。DCS產品在石油和化工行業的成功應用也促進了其他行業控制系統的發展，在隨后的幾年，冶金、建材、電力、輕工等行業的新建項目中也陸續使用了DCS產品，并成為這些行業的主流控制系統。
Pay attention to the situation where all operating stations are powered off
At this time, check if the power indicator light of the control station is normal, and if there is a fault in the card diagnosis indicator light. The red light and green light indicate that the card is working normally. If all of the above are normal, it can be determined that the control station is working normally and the self adjustment system is working normally. However, the operator cannot see the monitoring screen temporarily and cannot perform remote control operations on site. Immediately notify the microcomputer maintenance personnel to repair and go to the site for monitoring.
Pay attention to the situation where all control stations are powered off
Due to the dual power supply of all control station equipment, one UPS and one mains power supply, the probability of this situation occurring is very low.
When the control station is completely powered off, the two system alarm red lights on the monitoring screen light up, communication is interrupted, and all data is not refreshed. All self regulating systems are completely out of control, and the regulating valve will return to its initial state. The air opening valve will be fully closed, and the air closing valve will be fully open. At this time, emergency handling or parking should be carried out immediately, and the operation should be carried out on-site at the same time.
Here are our main products. If you need them, we can send them to help you compare the prices!
Main business: World brand PLC and DCS system spare parts modules
① Allen Bradley (USA AB) series products
② Schneider series products
③ General Electric series products
④ Westinghouse Series Products
⑤ SIEMENS (Siemens series products)
⑥ Selling ABB Robots FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots.
⑦ Westinghouse: OVATION system, WDPF system, MAX0 system spare parts.
⑧ Invensys Foxboro: I/A Series system, FBM (Field Input/Output Module) sequential control, trapezoidal logic control, accident memory processing, analog-to-digital conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
⑨ Siemens: Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
⑩ Bosch Rexroth: Indramat, I/O modules, PLC controllers, drive modules, etc.
◆ Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module, network communication module,
Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module
Module, redundant module, power module, relay output module, relay input module, processor module.
Our advantage is: brand new original, with a one-year warranty! All products of our company have undergone strict testing. We welcome inquiries and acquisitions. As long as you have sincerity, our company will provide you with a price advantage over peers and work together to win the order.