RELANCE 0-57510 控制器模塊
eNet網絡采用基于組播網絡通信技術，分布式網絡管理系統自動監視網絡變化及管理過程數據通信，任一eNet網絡節點可以隨時下線和上線。eNet上所有控制器節點采用基于例外報告式的主動發送機制，由KM950控制器根據數據的變化情況，進行主動地發送。無論有多少臺操作員站，控制器只發送一次數據，這種設計大大降低網絡負荷和控制器負荷。在設有10臺全功能站的DCS中，NT6000分散控制系統網絡負荷為傳統方式的1/10，而控制器的通訊負荷也為傳統方案的1/10，而且隨著操作站數量的增加，網絡負荷和控制器負荷保持恒定。恒定的低負荷帶來的更好的任務確定性和更高的可靠性,同時又提高網絡通訊的速度，NT6000分散控制系統的操作響應周期小于700ms，大大優于行業標準2.5s。
可靠性設計和特點
?。?）NT6000分散控制系統的核心模件均采用堅固的工程塑料外殼封裝，具有良好的散熱效果。模件均通過了嚴格的電磁兼容測試，符合三級標準，局部達到四級標準。能夠在現場復雜電磁環境中長期穩定工作。
?。?）NT6000分散控制系統控制網絡eNet采用對等式工業以太網，構架在兩個物理隔離的冗余工業以太網絡上，支持冗余環型或冗余星型網絡拓?fù)浣Y(jié)構；系統支持8個網絡域連接，每個網絡域最多連接64對控制器和64個操作站點，所有網絡節點間的數據傳輸不需要通過服務器傳遞。網絡域間通過三層交換機或路由器實現數據安全傳輸，任意網絡域間數據通訊的權限和數據流向均可設置。每個網絡設備都具有兩個獨立的完全隔離的網絡接口，冗余網絡同時工作，發送的數據在接受端進行數據過濾和冗余處理，如果發生網絡切換，切換時間等于零，在數據應用上沒有中斷和延時，因此，不存在網絡冗余切換問題。
The eNet network adopts multicast network communication technology, and the distributed network management system automatically monitors network changes and management process data communication. Any eNet network node can be offline and online at any time. All controller nodes on eNet adopt an exception reporting based active sending mechanism, which is actively sent by the KM950 controller based on changes in data. No matter how many operator stations there are, the controller only sends data once, which greatly reduces network and controller load. In a DCS with 10 fully functional stations, the network load of the NT6000 distributed control system is 1/10 of that of the traditional method, and the communication load of the controller is also 1/10 of that of the traditional scheme. Moreover, as the number of operating stations increases, the network load and controller load remain constant. The constant low load brings better task certainty and higher reliability, while also improving the speed of network communication. The operation response cycle of the NT6000 distributed control system is less than 700ms, which is much better than the industry standard of 2.5s.
Data transmission between all network nodes does not need to be transmitted through servers. The secure transmission of data between network domains is achieved through layer three switches or routers, and the permissions and data flow of data communication between any network domain can be set. Each network device has two independent and completely isolated network interfaces, and the redundant network operates simultaneously. The sent data is filtered and redundantly processed at the receiving end. If a network switch occurs, the switching time is equal to zero, and there are no interruptions or delays in data applications. Therefore, there is no problem of network redundancy switching
Reliability design and characteristics
1) The core modules of the NT6000 distributed control system are all packaged in sturdy engineering plastic shells, which have good heat dissipation effects. All modules have passed strict electromagnetic compatibility testing, meeting level three standards, and locally reaching level four standards. Capable of long-term stable operation in complex electromagnetic environments on site.
(2) The control network eNet of the NT6000 distributed control system adopts an equivalent industrial Ethernet, which is built on two physically isolated redundant industrial Ethernet networks and supports redundant ring or star network topologies; The system supports 8 network domain connections, with a maximum of 64 pairs of controllers and 64 operating sites connected to each network domain.