PROSOFT RLX2-IHNF-A 網關系統
支持的系統包括：羅克韋爾自動化（RA）ControlLogix（CLX）可編程自動化控制器（PAC）系統RA CompactLogix? （CPLX）PAC系統Allen-Bradley?（A-B）PLC5?系統A-B SLC? 系統A-B MicroLogix? 系統西門子S7?系統與工業以太網通信Schneider Electric?Quantum? 具有Modbus TCP/IP通信的PLC系統支持Modbus TCP/IP協議的任何設備學習目標當您完成本設置指南中的所有步驟后，您將學會如何理解示例應用程序的工作原理安裝和配置ILX56-MM模塊將附加說明導入ControlLogix和CompactLogix處理器（第24頁）驗證ILX56-MM模塊通信狀態
注意：這是由于傳輸目的地寫入錯誤而導致的。6.4.8清除錯誤計數傳輸狀態錯誤計數可通過兩種方式共同清除：1機組重新啟動。2“狀態運行時傳輸列表”頁面上將提供一個清除傳輸狀態數據按鈕，如下所示。ProSoft Technology，股份有限公司致力于提供最高效、最有效的支持。打電話之前，請收集以下信息以幫助加快這一過程：1產品版本號2系統架構3網絡詳細信息如果問題與硬件有關，我們還需要有關信息：1模塊配置和相關梯形圖文件，如果有2模塊操作和任何異常行為3配置/調試狀態信息4 LED模式5與模塊接口的串行、以太網或現場總線設備的詳細信息，如果有。注：對于美國境內的技術支持電話，ProSoft的全天候下班后電話支持可用于緊急的工廠停機問題。我們?cè)谌蚋鞯氐脑敿?xì)聯系信息見下頁。有關ProSoft Technology的銷售條款和條件、保修、支持、服務和退貨材料授權說明的完整詳細信息ILX56消息管理器是一種通信接口，可安裝在羅克韋爾自動化?ControlLogix?1756機箱中，以提供基于各種控制器和處理器的自動化系統之間的數據傳輸功能。
one for a 1756-L55 ControlLogix 5555 Controller, and one for a 1769-L35E CompactLogix5335E Controller. These ladder logic files contain controller tags that you will import into the ILX56-MM module. You will then be able to transfer data between both processors from the ILX56-MM module. 3.1.1 Required Steps This Setup Guide takes you through the following steps: 1 Install the ProSoft Module in the ControlLogix rack (page 20) 2 Set the module's permanent IP Address (page 21) 3 Download the Sample Ladder Logic to the ControlLogix Processor (page 23) 4 Download the Sample Ladder Logic to the CompactLogix Processor (page 25) 5 Connect the ControlLogix and CompactLogix racks to the Ethernet Network (page 27) 6 Configure ILX56-MM Module (page 27) 7 Verify Data Exchange (page 50) 3.2 Architecture The sample application uses the following hardware and connections.
one for a 1756-L55 ControlLogix 5555 Controller, and one for a 1769-L35E CompactLogix5335E Controller. These ladder logic files contain controller tags that you will import into the ILX56-MM module. You will then be able to transfer data between both processors from the ILX56-MM module. 3.1.1 Required Steps This Setup Guide takes you through the following steps: 1 Install the ProSoft Module in the ControlLogix rack (page 20) 2 Set the module's permanent IP Address (page 21) 3 Download the Sample Ladder Logic to the ControlLogix Processor (page 23) 4 Download the Sample Ladder Logic to the CompactLogix Processor (page 25) 5 Connect the ControlLogix and CompactLogix racks to the Ethernet Network (page 27) 6 Configure ILX56-MM Module (page 27) 7 Verify Data Exchange (page 50) 3.2 Architecture The sample application uses the following hardware and connections.
The Sample Application uses controller tags to read and exchange data values between the ControlLogix and CompactLogix processors. If you have downloaded the Sample Ladder Logic to both processors, these tags will be available in the ILX56-MM module. To start with, both PLCs need to have tags entered that will serve as the tags that will receive/read data values and tags that will transmit/write values from and to the other PLC. Once these tags have been entered and ladder logic developed in both PLCs, the ILX56-MM module's configuration process can proceed. Note: The sample ladder logic is used only to demonstrate how to put values in tags.In the Sample Application, the ILX56-MM is configured to exchange data between the two processors through its backplane connection to the ControlLogix processor. The module requires no additional programming to accomplish data exchange. Sample Application using ControlLogix Backplane The following diagram illustrates how data is transferred through the ILX56-MM module in the Sample Application.The Sample Application consists of two ladder logic files,