LAM 890-14443-101 自動化控制模塊
產品概述：
安裝步驟使用CD或Disk 1上的安裝程序安裝890-14443-101服務器軟件。或者，也可以從890-14443-101網站下載并安裝890-14443-101軟件，890-14443-101，在ProAct控件上的9針連接器和計算機上未使用的串行端口之間連接一根零調制解調器通信電纜。在您的計算機上啟動Servlink通信服務器程序（890-14443-101）。執行程序時顯示以下內容
890-14443-101監視窗口數字格式1.05.1以前的監視窗口版本需要特定的數字格式才能正確顯示值。所需的格式使用逗號（“，”）進行數字分組，使用小數點（“.”）進行十進制符號。這些設置可以從計算機的“控制面板”/“區域設置”/“編號”選項卡頁進行調整890-14443-101。使用觀察窗口觀察窗口由Woodward開發，是一款Servlink客戶端軟件產品，為890-14443-101致動器/控制器提供通用PC接口，是一種非常強大的設置、測試、調整和故障排除工具。
監視窗口提供了一種將應用軟件加載到裝置中、關閉裝置并將其置于配置模式、將值保存在EEPROM中以及重置控制的方法。應用程序可調值可以上載、下載并保存到文件中。目的觀察窗口是一種工程和故障排除工具，為控制系統提供一個窗口。Watch Window是支持Servlink協議的890-14443-101控件的主要故障排除工具。890-14443-101在通過串行通信端口連接到控制系統的PC上運行。工程工作站PC可以永久連接到控制裝置，也可以僅在需要時連接。通信服務器Servlink I/O server包含在與監視窗口相同的安裝中。890-14443-101典型的890-14443-101?應用程序，它提供了強大而直觀的界面。890-14443-101用戶熟悉菜單結構。通過資源管理器窗口提供變量導航，類似于890-14443-101中的資源管理器。監視窗口執行三個主要功能：監視和調整控制變量--監視窗口以表格格式顯示變量。用戶在任何給定時間選擇要查看的變量。
890-14443-101可以創建多個變量頁面，每個頁面都有用于各種故障排除或調整過程的有用參數。用戶可以根據正在執行的任務在頁面之間切換?？刂婆渲煤驮O(shè)置點管理——監視窗口可以從控制系統上傳或下載所有可調變量。890-14443-101此功能允許用戶（例如，車隊所有者、經銷商、包裝商）從一個控件上傳（和保存）所有可調參數，并將相同的設置下載到類似發動機配置的其他控件。程序加載--監視窗口提供將新程序下載到控件的服務。這僅在專業版中可用。
監視窗口用戶界面監視窗口用戶接口由三種類型的窗口組成：主窗口資源管理器檢查器所有監視窗口應用程序只有一個主窗口和一個資源管理器窗口。每個應用程序可以有用戶喜歡的任意多個檢查器窗口。主窗口主窗口是應用程序控制窗口。它用于關閉應用程序。它還用于控制資源管理器的可見性，以及創建、控制、保存和恢復檢查器。主窗口由一個工具欄和一個菜單組成。資源管理器資源管理器用于瀏覽890-14443-101中可用的變量集，調用控件上的命令，并查看控件的屬性。資源管理器由一組選項卡式工作表組成。每個工作表都與來自890-14443-101的單個控件相關聯。工作表的選項卡標記有關聯控件的標識符。每張圖紙都包含一個樹狀視圖。樹狀圖以層次結構顯示控件的應用程序中的類別和塊的名稱。樹中每個級別的名稱都按字母順序列出。
Monitor (Service) The Service Tool will provide the capability to monitor control values at any time from the Service mode. Viewing and monitoring these parameters is not limited to a shutdown state, but is available at any time. Monitoring is available for, but not limited to, the following parameters: Electronics Temperature and Temperature Histogram Alarms and Shutdowns (individual) Alarm/Shutdown Event Log Position Control information (including actual position, current, demands) Status and I/O monitoring Factory Calibration, Test, and Debug Modes The Factory Calibration,890-14443-101 Testing, and Debugging are performed using the Woodward Watch Window Professional tool. The Factory Calibration mode performs analog input and analog output hardware calibration in software (calibrate out resistor tolerances). This includes calibration of Analog I/O (4 mA to 20 mA input, 20 mA to 180 mA input, 4 mA to 20 mA Output, Feedback sensor, Current sensor).890-14443-101 The unit will store all hardware calibration parameters in nonvolatile memory and retain the calibration independent of the application software. The Test mode reads inputs and provides the capability to exercise the outputs.
The Debug mode provides additional parameters for monitoring and troubleshooting. Password Protection for Service Tool The Configure, Test, User Stops, and Calibration modes are all provided with password protection. This means that changes to the program and parameter tuning/calibration are password protected.890-14443-101 The password is a simple 'keyword' password that is fixed and cannot be changed. This password is intended only to prevent inadvertent changes to the ProAct actuator. This password is only required to make changes (writes), program monitoring does not require a password. 890-14443-101Monitoring includes viewing configurable parameters, tunable parameters, alarm and shutdown conditions, and control parameter monitoring. Program Up-/Downloading The Service Tool has the capability to save the current application parameter settings to a file. It can also take a previously saved file and load it into the ProAct. If a previously saved program is loaded, configuration and tuning are not necessary. This obviously simplifies the steps required to get a new ProAct actuator up and running. How Do I Get Started? The steps required to get started include: ·890-14443-101 Install the Service Tool (Watch Window/Servlink) software following the installation steps described later in this chapter.